SDI-in/out option for Forward T Product


SOFTLAB.TV main page

Analog TV
+Forward TA/TA2
+Forward TP/TP2
+Forward TT
+Forward T

+Forward Solutions
+Forward Plugins

Digital TV
+Forward TS-ASI
+ASI coders
+ASI decoders

IPTV
+Forward TS-IP
+IP coders
+IP decoders

HDTV
+Forward TS-IP HD

HQ Rear Projection
+Forward TK

Unique Chromakey
+Focus Virtual Studio
+Focus HDTV

Sports Events &
LIVE! Shows
Broadcasting
+Forward Goalkeeper


Not found product info? Any questions? CONTACT US

Site map

The SDI-in/out Option

To get a high-quality image when using "Forward T" products, the ability to connect digital video signal sources/receivers via the SDI-in/out option is available. An SDI board is installed on the FD300 board, the connector strip being securely attached to the case.

The FD300 board with SDI-in/out Option - click here to enlarge

There are three BNC connectors for the input/output SDI signals (video with embedded audio):

SDI input - SMPTE-259M-C receiver block provides receiving the ITU-R-601 digital video signal
SDI output - SMPTE-259M-C transmitter block provides transmitting the ITU-R-601 digital video signal

To power up, use a standard connector on the board such as for the floppy disk drive.
Important: the power supply is connected to the FD300 board only (the power cord comes with the SDI option). For more detail, see the document ( 1.2M ).

Technical Specification

SDI input

270 Mbps SMPTE 259M-C, unidirectional input
ITU-R-601 component digital video signal
One BNC connector
2 embedded audio channels SD: SMPTE 272M-A

SDI output

270 Mbps SMPTE 259M-C, two unidirectional outputs
ITU-R-601 component digital video signal
Two BNC connectors
2 embedded audio channels SD: SMPTE 272M-A