Захват прямой трансляции с Ютуба

Здесь обсуждаются любые продукты компании СофтЛаб-НСК для телевизионного вещания (Форвард Т, Форвард ТС, Форвард Голкипер, Форвард Рефери, Форвард Офис, Форвард Инжест)

Модераторы: Людмила, PR, vd, Даниленко Сергей

Ответить
Даниленко Сергей
Сообщения: 7091
Зарегистрирован: 26 фев 2004 09:53
Откуда: Techsupport SoftLab-NSK

Сообщение Даниленко Сергей »

Лучше обратиться в отдел техподдержки и получить ссылку на новые версии ПО.
Или попробуйте принять поток на вашей версии ПО.
bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

Good morning,
I have a problem with SLStreamerPro. Transmissions are "running", but the OnAir2 "input settings" does not display the IP source.

Изображение
Изображение
Даниленко Сергей
Сообщения: 7091
Зарегистрирован: 26 фев 2004 09:53
Откуда: Techsupport SoftLab-NSK

Сообщение Даниленко Сергей »

bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

So far this solution worked. I'm using your template for YouTube. The video I see in TitleMonitor
Даниленко Сергей
Сообщения: 7091
Зарегистрирован: 26 фев 2004 09:53
Откуда: Techsupport SoftLab-NSK

Сообщение Даниленко Сергей »

Is problem solved?
bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

From the beginning I see an image from YT in TitleMonitor, but there is no source in OnAir2. Previously it worked. In SLStreamerPro, the job is "runner".
bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

Thank you for your time.
support
Сообщения: 66
Зарегистрирован: 28 ноя 2007 11:04

Сообщение support »

There were some changes in youtube live recently so you will have to re-edit your graph:
stop it and increase the parsing timeout up to 60.
Then configure the graph verifying that you get video and audio PIDs.
If everything is right start the graph again and make sure that there is "Graph was started" report in the log window.
Hopefully it will help you to insert youtube live into your feed.
support
Сообщения: 66
Зарегистрирован: 28 ноя 2007 11:04

Сообщение support »

bluepk,
have you finally got youtube stream ?
If there is any issue please send
Saveinfo and your graph to our techsupport:
forward@softlab.tv
bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

Everything worked. Thank you again.
bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

Good morning,
I wanted to upload a picture from Youtube Live to TitleDesigner. Unfortunately, when loading a file to OnAir 2, an error occurred. You can see it here:https://www.dropbox.com/s/q9yvy60p3yuzs ... m.jpg?dl=0

Can you do something about it? I want to show 2 streamy (images) from YouTube Live, but the sound of 1 all the time. I wanted one source to show in the schedule (Input1) and the second source with TitleObject
support
Сообщения: 66
Зарегистрирован: 28 ноя 2007 11:04

Сообщение support »

Looks like you don't have an IP-camera license which is needed when you show live stream as a title object.
We can tell it for sure if you send the information collected with Saveinfo to our tech support forward@softlab.tv

But there is another way to do what you want:
you create 2 graphs from YouTube, second one without audio PID and make 2 video inputs in OnAir and 1 auxiliary audio input that takes audio from first graph.
Then show input1 as usual with F3, and input2 with F4+F6,
so you will get audio from first Youtube source when showing second one.
bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

I understand. You said that you do not need an additional license for IPCamera at Youtube Live.
bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

support писал(а):you create 2 graphs from YouTube, second one without audio PID and make 2 video inputs in OnAir and 1 auxiliary audio input that takes audio from first graph.
Can I insert an auxiliary audio in StreamerPro or OnAir2?
bluepk
Сообщения: 82
Зарегистрирован: 16 сен 2015 20:08

Сообщение bluepk »

I have two sources youtube Live.
1. "YT1"
2. "YT2"

Input 1 and Input 2 have SDI inputs. Input 3 is doing "YT1", input 4 is doing "YT2". To auxilliary audio I can not assign either "YT1" or "YT2". If you disable the "bird" at input3 or 4, the aux sound appears.
Ответить